4 Signs of Blown Speaker

This speaker repair guide explains how a speaker works, what commonly goes wrong, how to diagnose a speaker issue, and what parts and tools are required to repair it. And when to call a specialist and get the blown speaker repaired in Sydney.

How does the speaker work?

The sound produced by another component of the system is amplified by audio speakers for a home stereo or entire home entertainment system. A typical speaker is made up of several different parts that work together. A 6- to 15-inch-diameter cone woofer for low frequencies, a 3- to 6-inch-diameter dome or cone midrange drive, and a small tweeter for high frequencies are typical enclosure components. Speaker cables carry audio signals to a terminal block at the enclosure's back. Once inside, a crossover network divides incoming frequencies into appropriate ranges and routes them to the appropriate driver. The input is then converted into mechanical movement of the cone, which moves the air in a way that your ears detect as sound.

What is the sound of a Blown Speaker?

You're probably hearing something similar but on a much more subtle level. Interspersed with the rest of the audio is what sounds like a swarm of bees buzzing around or a scratching sound. If you've heard of digital clipping, you'll understand what I'm talking about. Because this distortion may be quietly embedded in the audio, it can be subtle and difficult to detect. Another reason is that the noise is produced at the same pitches as the music or voices being played back.

If it's not immediately obvious, you'll have to pay attention. Muting the other speakers and only listening to the problematic one helps.

Signs that your speakers are blown

Improper use is most likely to affect speakers. The enclosure may be damaged or come unglued. An electrical or thermal fuse can be blown by the speaker. It's possible that the wiring is faulty. A faulty voice coil, blown speaker, faulty crossover network, or faulty solder connection are all possibilities. A driver cone can be damaged if the cables and connections are faulty. This means speakers aren't in sync. Level controls can be tampered with. All of them can be fixed.

Here's a quick overview of the problems you'll run into if you have a blown-out speaker. Some will be more subtle than others, and it all depends on how badly your unit has been damaged.

1. There is a distortion at normal volumes

If you hear hiss, static, or fuzz even at moderate volumes, you're dealing with one of two issues. You either have a torn cone or loose or damaged voice coils. The problem should get worse if you turn up the volume.

2. There is the incomplete frequency response

A blown woofer is identified by incomplete or inaccurate frequency response. This means you'll hear less bass or high frequencies from this speaker than from others in its set. Call an experienced person in Sydney who will repair your speaker.

3. There is a lack of cone distortion

A speaker's cone moves quickly to push air around and create sound. If it isn't vibrating, it isn't receiving power. This indicates that a wire has come loose or that a component within the speaker assembly is malfunctioning.

4. The infinite impedance at the coils

A multimeter can be used to test the impedance at the voice coil for the more technically inclined. If it's nearly infinite, you've got a serious electrical issue on your hands.

If you are finding any of the signs, then call a specialist in Sydney for repairing your blown speaker.

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.