Maintenance Practices that Increase the Lifespan of Your Vintage Turntable

What most fail to notice is that; these calm, stress-relieving music players are just as vulnerable to wear and tear as any other electronic appliance in your household. So, keeping them in good condition is crucial to making them last longer. Clean them when you’re supposed to and get vintage turntable repairs in Sydney when components develop faults. Thankfully, this blog post contains all the best maintenance practices for keeping your turntable in optimum shape. Spare a few minutes and scroll down to find out more;  

How do record players get dirty? 

If you’re observant with your turntable record player, you’d notice how dusty it often gets. If you’re wondering why that happens, it’s because your vinyl record creates static electricity each time you use it. This form of electricity created attracts dust and debris from the atmosphere around it. Even if you can’t see the debris on your turntable, if you hear the hissing and popping sound you hear in the movies, it’s high time you cleaned your turntable. Failure to do so would expose your vinyl player to accelerated degradation.  

To avoid such, our experts advise you to get your vinyl player cleaned at least two times a month. Also, get these supplies ready prior to cleaning day: 

• Rubbing alcohol (or isopropyl alcohol) 
• Dusting cloth 
• Stylus brush 
• Brush with a soft bristle 
• Microfibre cloth 

How to maintain your turntable? 

1. 1. Take care of the stylus 

Cleaning your stylus immediately after every use is a must if you want it to last longer. Fortunately, it’s pretty easy to do. To properly clean your stylus though, you’d need to get a stylus brush at your local convenience store. A paintbrush is a better substitute but it’s better to be on the safer side.  

To clean your stylus, carefully wipe the tip of the needle from back to front. Avoid cleaning from side to side so you don’t bend the needle. Once done, store it for future use. If it’s been a while since you cleaned your stylus, dampen the brush with some rubbing alcohol and repeat the procedure mentioned in the paragraph above.  

2. 2. Get rid of dust buildup 

Dust builds up on the vinyl plate over time. So, we advise you to use a microfibre cloth to wipe off any of the dust buildups gently. If you have heavy dust on your plates, soak the microfibre cloth in isopropyl alcohol and wipe your disc to cleanliness.  

3. 3. Get a support stand for your turntable 

Your turntable may have the propensity to cause the suspension to rattle as people walk by. Making the right platform choice is the answer. Place it far from any source of vibration since it might interfere with the signal; you want to prevent it from vibrating. You can prevent distorted audio with this method. Unless you have a particularly good turntable that can absorb such vibrations even before they reach the needle and the record, you want to keep any unwanted forces out. 

4. 4. Replace faulty components immediately after they happen 

It’s crucial to remove and replace any defunct components of your turntable before they get worse. You may do it yourself or contact us to help you with your vintage turntable repairs in Sydney. 

5. 5. Change the belt once in a few years 

Anyone who owns a belt-drive turntable should be reminded of this. When should you replace it? When you notice it slipping lower on its pulley than normal, it's time to replace it. Alternatively, if you hear it squeak when you turn on your device, it may be time to get a new one. 

6. 6. Ensure your anti-skate counterweight is properly positioned 

As the record spins, this component of the apparatus ensures that your stylus is exactly positioned in the groove's centre. Because it may affect how your stylus rests inside the record grooves, proper alignment is crucial. 

7. 7. Calibrate the tracking force and height settings 

This prevents skipping needles and increases record wear. To have the highest possible sound quality, it's crucial to take care of all the components of a turntable. But keep in mind that the tonearm, which is said to be the most crucial component of your turntable, requires superb arms. 

That wraps it up! 7 fool-proof maintenance tips for making your turntable look good as new all year round. Remember! Not all issues with your turntable can be repaired by yourself. Given the complex way how signals work, some issues are best left in professional hands. Contact us to get professional vintage turntable repairs in Sydney.

Disclaimer: This is generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.