4 Sure Tips For Troubleshooting Speaker

Speakers have become a necessity in almost every major event around the world, and the quality of these speakers can be deduced from the sound. They vary in types like subwoofer, tweeter, woofer, mid-range, studio monitor, and so on. Some speakers are used in different gadgets like mobile phones and Music Players. Even though it is practically obvious to spot a faulty speaker, it might be hard to determine if it only requires a repair or you have to change it completely.

Before you jump into the process of buying a new one, asking a professional electrician for advice may be the best thing to do when it comes to speaker repair. You can save yourself some cash by personally checking the current status of your speakers with little or no cost. Being able to personally check your speakers would come in handy most especially before or during an event. Here are some ways to check if your speaker needs repair:

Test with a known good on

One of the simplest ways to test your speakers is to remove the suspected faulty one and put a known good one to know whether it is the wiring or the speaker magnet that is at fault. This should be done when the speaker is refusing to work at all. Plug the good one and listen to know if it would work. It can be very effective in diagnosing the faulty parts of your speaker. If one of the parts shows signs of damage, take it to an electrician who does speaker repairs before you decide to buy another one for the replacement.

Test your suspected faulty speaker with a working amp

Another way to test for a faulty speaker if you don’t have a known good one to confirm with is to test the suspected faulty one with a working amplifier. This can be done by connecting your speaker to a working amplifier, after connecting make sure to switch on the amplifier then listen to the speaker to hear a sound that indicates the presence of electricity. After making sure all connections are well secured and correct, if the speaker doesn’t show the signal of electricity then it means the speaker needs repair.

Visually inspect the speaker

Depending on the size of the speaker, when looking at the speakers it is possible to know if the speaker is blown or not. Most times when a speaker gets damaged or blown, you will see tear marks on the magnet cover where the sound comes from. It is usually the easiest way to know you need to change the magnets of the speakers and you don’t necessarily have to buy an entirely new speaker.

Physically inspect the speaker

Just like when you visually inspect it, the physical inspection would mean the use of your hands, electric tester, plugged electric wires, and so on to check for faults. When planning to physically inspect, start by touching the magnet's cover and tapping the magnet lightly, the tap should give you a fluffy sound that shows it is not thorn or blown. You can trace the wires for any melted or disconnected wires in the speaker or check with the electric tester to know if electricity is being supplied to appropriate parts of the speakers.

With these few tips, you should be able to check a couple of speakers. Some speakers are more complicated than others due to the advancement in technology, making it difficult to check for faulty parts or even trace basic wiring problems. When you encounter speakers like this, it is better to check with an electrician that does speaker repairs.

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.